Technical data
| MIG 3 |
MIG 4 |
|
|
 |
Specifications of magnetic impulse systems
| Parameters |
MIG 3 |
MIG 4 |
| Supply voltage,V |
380 |
380 |
| Frequency, Hz |
50 |
50 |
| Protection of power cabinet |
IP 54 |
IP 54 |
| Maximum operating voltage kV |
3 |
4 |
| Installed power, kW |
1.5 to 2.5 |
2 to 3.5 |
| Capacity of battery uF |
from 1000 to 2400 |
from 1000 to 2400 |
| The average interval of pulses |
from 3 to 8 |
from 5 to 10 |
| Maximum energy settings, kJ |
10.8 |
19.2 |
| The maximum number of channels * |
24 |
24 |
| Mode |
Automatic or manual |
| Controller Type ** |
Siemens S7 1200 |
| Type HMI ** |
Siemens KTP 400 Basic mono |
| Possible interfaces Ethernet S7, |
Profibus, Modbus RTU |
* In some cases, the number of channels can be increased.
** On request these can be replaced with Schneider Electric, ABB, etc.
Magnetic impulse system is equipped with modern Siemens Simatic S7 programmable controllers that allows to set any mode setting for MIG.
Note. Magnetic impulse installations have wide range of applications and are manufactured to solve different problems – for filter regeneration, for collapsing arches and removal of build-up of different materials. Therefore, depending on the type of faciliries and design solutions, technical installations may differ from those shown in the table.
The optimal selection of the type of magnetic impulse installation MIG in accordance with its parameters and depending on its use ensures high efficiency of filter regeneration, prevention of hung loose materials on the surfaces of containers, arch-collapse and destruction of the deposits on the walls of the processing equipment.
Specialists of "INTERTECH" will develop and manufacture magnetic impulse cleaning systems customized for you and will find the optimal solution for your problems.
|
